Precast Concrete Mixer Twin Shaft Type

The price of a twin shaft precast concrete mixer is mainly determined according to its discharge height, production process, steel thickness, motor quality, anti-corrosion paint, brand and other factors. The material is different, and the price is also different.

The mixing and homogenization of the twin-shaft precast concrete mixer is mainly achieved by the mixing shaft and the agitator installed in the mixing drum. Multiple sets of mixing shovel are installed on the two horizontally arranged mixing shafts. When the concrete mixer starts to work, the material performs a combined action of circular arc movement and axial and radial movement, and the material in the middle of the two weeks will be pushed to the middle by the mixing device. When there is intersection, a certain force will also be generated between the materials to strengthen the stirring effect, and the final mixture is stirred to uniformity. This is the working principle of the twin-shaft concrete mixer. We can also find that the twin-shaft concrete mixer not only has the working characteristics of a forced concrete mixer, but also has the advantages of an overturn concrete mixer.

The installation and maintenance of precast concrete mixer are:

1, Installation: Place the machine steadily, install the machine feet, and level it so that the machine can run freely.

2, Before use, refuel the place where it needs to be refueled, and then perform no-load operation to check whether the fasteners are loose, whether the electrical appliances are normal, and whether the machinery is running normally. If there is any abnormality, repair and debug.

3, Turn the feeding port to the top, open the feeding cover to feed, and the feeding amount should not exceed the specified volume, then close the feeding cover and start the machine to run. If an abnormality is found on the way, it must be shut down for inspection.

4, The inside and outside of the hopper must be rinsed clean after get off work or when changing types.