Concrete Batching Plant Technology

The concrete batching plant technology environmental protection performance is mainly reflects that the mixing process is closed building. In order to further eliminate dust, a movable color steel plate is added as a dust surface, and the space of the dust outlet is sealed. Add two symmetrical water mist spray pipes at the cement feeding port to prevent dust from spreading.

What are the main aspects of the improvement of concrete batching plant technology?

1, Energy saving:

The main energy sources of concrete batching plants are water, electricity and gas. After the equipment scheme and technical scheme of the concrete batching plant are determined, the energy consumed is difficult to achieve through technological innovation, mainly through strengthening management and rational recycling. The specific management measures for water, electricity and gas are formulated and implemented by the board of directors.

2, Environmental protection:

Environmental protection is a content that must be checked when the concrete batching plant is completed and accepted, and it is also a basic requirement for building a civilized concrete mixing plant. The environmental protection standard of the concrete mixing plant is mainly to effectively control dust, waste water, noise, and solid waste.

3, Dust control:

The place where dust is likely to be generated in the concrete batching plant is mainly the feeding port of the mixing building and the material yard. The mixing building of the selected equipment is closed mixing. In order to further eliminate dust, a movable color steel plate is added as a dust surface, the space of the dust discharge port is sealed, and two symmetrical water mist injection pipes are added at the cement feeding port to prevent dust from spreading. For the dust in the stockyard, according to the fixed position of the stacking place, an electric control or manual spraying device can be set up to control the escape of the dust and ensure that the dust reaches the standard.

4, Wastewater treatment:

Set up a drainage ditch at the place where the wastewater is produced, and set up a three-stage sedimentation tank at the end of the drainage ditch to separate the solid from the liquid, and configure a self-priming water pump to recycle the settled water to make the wastewater in the entire production area realize recycling after all treatment, that is, meet environmental emission standards.

5, Noise control:

The noise mainly comes from the concrete batching plant equipment. The selected concrete mixing plant equipment has been optimized in configuration, and the noise of the equipment itself is relatively small. Strengthening maintenance and inspection during use will not only prolong the service life of the equipment, but also reduce noise pollution. According to the actual situation, partition walls and partition belts can also be set.

6, Solid waste treatment:

Non-recyclable waste and domestic garbage generated in production and life will be piled up in a garbage pool for unified management and treatment. There are no schools around the concrete mixing plant, and there are basically no residents. The requirements for environmental protection investment are not high, and the investment cost is not large. The concrete batching plant technology will be built into a green and environment-friendly concrete mixing plant by strengthening environmental protection management.