How to maintain a mobile mixing plant

Regular maintenance of a mobile mixing plant includes aspects as listed below.

1. After the shutdown, the materials in the mixer of the mobile concrete mixing plant should be cleaned up in time, and the materials released in time. The cement tank valve should be closed and the powder in the two spirals discharged completely to avoid long-term downtime that will lead to blocking of the gamble.

2. Tighten the mixer blades to refuel each bearing. Remove the adhesive on the belt idler and clean the material that the belt has scattered to the ground in time.

3, In rainy weathers operators should pay attention to whether there is water around the control cabinet, and it is necessary to promptly remove the water around the electrical control cabinet and the water around the equipment.

4. In the rainy days, the motor reducer air compressor vibrator of the mobile mixing plant should be covered to prevent rain.

5. The whole machine should be painted once a year, the whole machine oil replaced once a year, and the reducer replaced once every six months.

6. The belt roller should be checked regularly and frequently, if there is no smooth rotation, it is necessary to lubricate rough ones in time. Refer to the equipment manual for the lubrication time and the type of fuel to be applied.

7. It is strictly forbidden to add gear oil to the drum motor when changing oil. Because the gear oil will corrode the motor enameled wire. Generally add No. 46 mechanical oil. Or ordinary bulk motor oil. Diesel oil or transformer oil is also available. Generally such oils are relatively rare.