Choose Twin-shaft Small Concrete Mixers

Choose twin shaft small concrete mixers from Haomei Machinery with great cost performance. Shaft holding has always been a problem that plagues users. It will not only affect the quality of the produced concrete, but also shorten the service life of the concrete mixer. In fact, if you choose the twin-shaft concrete mixer of concrete mixer manufacturer like Haomei Machinery, this problem will not exist. We have changed the design of the horizontal shaft concrete mixer greatly improves the shaft holding problem.

1, Feeding device redesign

The inlet of cement, fly ash and other powder materials is located between the two mixing shafts of small concrete mixers. In order to better let the powder in, our twin-shaft concrete mixer has been specially designed to allow the powder to be discharged well. Avoid the mixing shaft and enter the position between the two mixing shafts to prevent cement from accumulating in the drum.

2, Water supply system redesign

The flushing point of our twin-shaft concrete mixer has been carefully designed to ensure that the water supply system can be fully cleaned when cleaning the inside of the twin-shaft concrete mixer, especially at key locations, to ensure that no concrete residue remains, and special pressure pump is added during cleaning to improve cleaning efficiency.

3, Effective volume redesign

In the twin-shaft concrete mixer, the volume utilization rate greatly affects the mixing efficiency and output volume. The mixing spindle must be submerged under the concrete when mixing. The concrete on the surface of the shaft cannot be solidified because it cannot be mixed, thus effectively solving the hazard of seizure.

4, Redesign of mixing arm

The design of the layout of the mixing arm of the twin-shaft small concrete mixers can speed up the frequency of the material's large axial circulation movement, and increase the reasonable countercurrent of the material, thereby increasing the chance of direct contact between the material and the mixing blade and forced action to eliminate the inefficient mixing zone and improve mixing quality.