Batching Plant Mixer

Large scale batching plant mixer users should do regular maintenance and repair work on the equipment of the concrete mixing plant. If the blades and liners are found to be worn, they need to be replaced as appropriate, and the transmission gears should be checked regularly to prevent the residual concrete from agglomerating and hindering the normal operation of the machine, The concrete batching plant mixer and discharge hopper should be cleaned every four hours, and check operations should be done regularly to ensure the efficient operation of production equipment.

What should be done to protect the batching plant mixer?

1, Do a good job of smooth maintenance of equipment bearings, reducers and other parts on a regular basis. It is easy to dry in summer. To a certain extent, the smooth operation of the machine can not only oppose the dry weather, but also prolong the service life of the concrete batching plant equipment. When using a smoothing agent It should be noted that the smooth oil level of the air compressor needs to be maintained at the upper line of the oil mark during operation. When the oil level is below the lower line of the oil mark, it is necessary to add new compact oil (summer compact oil No. 19, winter 13 No.), it is strictly forbidden to operate without oil.

2, At the end of each day's work, you must remember to clean up the concrete batching plant mixer. It is better to clean the mixer at least once during the curing of the concrete to prevent piles of material in the mixing tank. Short-term cleaning during production interruptions is more useful than cleaning after each shift.

3, When cleaning the batching plant mixer, in addition to washing with water, you can also mix it with water and small stones to make the cleaning cleaner.

4, When performing manual cleaning, do not use a hammer to eradicate solid concrete blocks, to prevent the mixing arm from cracking due to small losses due to vigorous movements.