Precautions for the use of bearings in brick making machine

Bearing plays an important role in brick making machine. If there is a problem with the bearing, the brick making equipment will not work normally. Bearing as an important part of brick making machine, its performance directly affects the brick making effect. In the course of operation of brick making equipment, the bearing may experience excessive temperature or abnormal loudness.

1. Too tight fit of bearing cap and shaft or too loose will lead to overheating of bearing. As soon as this problem occurs in the operation of the brick making equipment, there will be a sound of friction and obvious oscillation. Stop and remove the bearing. Repair the rubbing area and reassemble as required.

2. The uneven height of the two bearing pedestals or the different center of the motor rotor will cause the bearing to be impacted by extra load, thus causing the bearing to overheat. In this case, immediately stop and troubleshoot to avoid early bearing damage.

3. The bearing lubricating oil too much within brick equipment is the main causes of aging bearing, therefore, according to use for filling quantitatively lubricating oil in time, the general lubrication is accounted for 70%-80% of the bearing space, too little or too much is bad for bearing lubrication and heat transfer.