The quality inspection of concrete mixing station

There are nine major parts of commercial concrete mixing station, so as long as there is no quality problem in these parts, there is no big quality problem in this concrete mixing station.

1. If commercial concrete station mixing host is self falling mixing drum, its discharging coil radial runout will be not more than 1% of the inlet diameter, also check the quality of the steel sieve and screen, the reasonable size of the mesh and screen and check the installation accuracy;

2. The driving system of commercial concrete mixing station should operate flexibly without abnormal sound;

3. The belt conveyor, bucket elevator and cantilever dragline of commercial concrete mixing station should be driven smoothly, with flexible operation, high braking, no abnormal noises and no clamping chain;

4. It is also important to check the measurement system of commercial concrete mixing station. The sensitivity and accuracy of the measurement system should be checked.

5. Also pay attention to reducing the lifting temperature of the machine, so as to reach the qualified book temperature;

6. The metering hopper should flow in and out of the material smoothly, without the phenomenon of material accumulation and overflow;

7. The safety valve shall not leak;

8. Qualified quality of cement tanks;

9. The wiring installation of commercial concrete mixing station should be reasonable and the equipment should be installed correctly.