Deal with residual concrete in YHZS25 concrete mixing plant

The mobile concrete mixing station is easy to stick to the residual concrete on the inner wall of the main concrete mixer. If it stays long, it will condense and is not easy to clean. Therefore, after one day of work at the YZS25 concrete mixing station, the concrete mixer should be cleaned. If it is not cleaned, it will affect the work of the concrete mixer. So how do you clean the concrete remaining in the concrete mixing plant? Haomei Machinery will let you know.

1. Before starting the JS750 concrete mixer, check whether the controllers are excellent. After using the concrete mixer to stop working, pour water and stones into the mixing drum for 10~15 minutes to clean, then clear the water and stones.

2. When the operator assumes that it needs to enter the mixing drum for cleaning, it should block the power supply and remove the fuse, and lock the switch box.

3. Assume that the cleaning concrete mixer finds that the material on the inner wall of the drum is very strong and difficult to eradicate. It prevents the concrete from being crushed by the sledge hammer and removes the concrete accumulated in the concrete mixer cylinder. It can only be gradually removed by the chisel to avoid damage to the drum.

4. When using concrete mixer in autumn and winter, after the work is finished, use water to clean the mixer drum and drain the water in the water pump, water tank and water pipe to avoid freezing in the water pump, water tank and water pipe.

The above is the working experience of the concrete mixing station brought by Haomei Machinery. If you have any questions or suggestions, please feel free to contact us or visit the site.