What inspection items are required for HZS90 concrete mixing station before the operation

After HZS90 concrete mixing station is installed, most customers need to inspect the equipment. Then, what items should be checked before the operation, and what requirements are required during the inspection? Below, Haomei Machinery will introduction to you.

1. Open the valve to discharge gas path system excessive water accumulated in the gas-water separator, and open the gas-sink discharge plug to discharge the oil-water mixture;

2. All control and display parts of the weighing device work normally, and the accuracy is in accordance with the regulations;

3. Each electrical device of concrete batch plant for sale can effectively control the mechanical action, and no obvious damage to the contact points, and moving and static contacts.

4. The wire rope of the lifting bucket or the shovel is installed, the winding of the reel is correct, the wire rope and the pulley comply with the regulations, and the brakes for lifting hopper and the shovel are sensitive and effective;

5. In the concrete mixing drum of precast concrete plant, the transmission of various supporting mechanisms, moving parts and warehouse doors, bucket doors, tracks, etc., there are no foreign objects stuck;

As shown in Figure 6, the oil level of each lubricating oil tank meets the requirements;

7. The bolts of each part have been tightened, and each inlet and discharge valve has no over-wearing. The tension of each conveyor belt is appropriate and does not deviate.