When 6m3 small concrete mixer truck is in trouble, it is necessary to clean the internal concrete in time. There are usually two ways to clean it:
method one:
1. Prepare the emergency drive hose, turn off top quality cement mixer truck, and remove the high pressure tubing connector on the hydraulic motor.
2. Turn off the rescue vehicle, remove the high-pressure oil pipe of its hydraulic motor, and connect it to the corresponding connector on the faulty vehicle with the emergency drive hose.
3. Start the rescue 6m3 concrete mixer truck for sale and turn its handle to the discharge position. The concrete inside the faulty vehicle is discharged.
4. After the emergency drive is completed, remove the drive hose and restore the original condition of the two cars.
Method Two:
Put a wooden wedge between the roller and the raceway to control the rotation of the mixing drum, sure to pay attention to safety; turn off the engine, remove a high-pressure oil pipe of the hydraulic motor, the mixing drum can rotate freely, and control the rotation of the mixing drum, make the maintenance hole to the lower part, then open the maintenance hole to clean out the concrete inside the barrel. At this time, we must pay attention to safety. After the concrete is discharged, restore the original state of the mixer.
Under normal circumstances, most people will choose to use method one to solve, when method one can not solve, then choose method two. I hope that the above methods will help everyone, and more exciting content, please continue to pay attention to us.
onu3ri���pt;" > wrinkled. Ordinary beauty waxing, of course, has some effect, but since any small concrete mixer truck wax contains bismuth ingredients, it will rust paint after a long time of ultraviolet rays, leaving a little black spot. Moreover, the car wax itself does not function to strengthen the hardness and resist ultraviolet rays, and will quickly lose due to the excessive temperature. Therefore, mini concrete mixer truck should be parked in a cool place when parking.