The harm of violating the operation of concrete pump truck

The reason for the overheating of the summer engine is that the maintenance is not in place, the engine coolant is lost, or the spring poplar willow is attached to the radiator, so as to reduce the heat dissipation. The main solutions for these problems are to be maintained and protected, to ensure the quality and quantity of the engine coolant, to clean up the surface of the radiator and to ensure the normal operation of the engine heat dissipation system.

In order to control the temperature of the engine of the cement pump truck better, some pertinent suggestions are put forward here for your reference. The best use of the normal antifreeze is the engine coolant. The antifreeze must be in the period of validity and the liquid is sufficient. In addition, the amount of water can not exceed 10% of the total amount of the coolant. In the very hot environment, the evaporation of water is very fast, and the concrete placing boom is working more continuously during the summer construction peak, so water is not recommended as the coolant of the concrete pump lorry engine. Before the spring temperature warms up, a layer of gauze can be added in front of the engine radiator to keep the radiator clean.

When the truck mounted boom pump works, careless operation can cause fatal damage to people and equipment. The damage caused by the dismantling of the pipe in the concrete conveyor pipe of a concrete pump truck can be loosened before the pipe dismantling joint, and the pipe is gently swayed to pressure the pipe. The damage caused by the overturning of the pump caused by the unstable lifting or gravity center must be firmly fixed on the vehicle when the stirring tow pump moves. Vehicle-mounted forced mixing pump uses five cylinders to adjust the center of gravity freely. The mixing system can move forward and backward, and the center of gravity is safe.

The injury caused by the body part entering the hopper or moving mechanism when the pump is working. Workers are prohibited from pedaling the hopper so as not to fall down due to the vibration of the machine or the foot is stuck by the screen. The internal and external protection of the cable is broken; the electric pump is electrified due to the failure and damage of the electrical components, resulting in electric shock damage. It is found that all electrical components or wires are damaged and must be replaced in time.