Oil temperature control of concrete brick making machines

The temperature of the engine oil of a concrete brick making machine must be controlled within a reasonable scope, or else the motor might be destroyed. Many clients have the machine working for longer hours than expected, which leads to rising of the oil temperature easily. How to control the temperature, then? Four tips help you to solve the problem.

1. Always pay attention to the proper oil level in the oil tank, so that the oil in the system can meet the circulating cooling conditions.

2. The viscosity of the oil used in the machine should be selected correctly. If the viscosity is too high, the energy will loss during the oil adding. If the viscosity is too low, the possibility of leakage will rise. Both will increase the oil temperature. When the oil changes, the volume power of a automatic hollow block making machine will decrease, and the oil film between the relative moving surfaces will be destroyed, so that the resistance will increase and the friction will be lost. All these will lead to the heating of the oil. Therefore, it is necessary to keep the oil clean and replace the oil in time.

3. When the concrete brick making machine system is not in operation, it must be unloaded.

4. Ensure that the water in the cooler of cement brick making machine is enough and the pipeline is smooth.

An automatic concrete brick making machine is driven by hydraulic system to realize the brick forming. Equipment failure or overload work will cause rising in the oil temperature, and excessively high temperature will affect the normal operation of a cement brick machine. Therefore, owners must attache great importance to this issue.